Retrotec Blower Door Bedienungsanleitung PDF herunterladen (Seite 44)

Page 44 of 87

©Retrotec Inc. 2015

4.14 Completely automated results using FanTestic

You can have FanTestic do all the steps for you but at first, it is wise to follow the preceding manual procedures so you

can get a feel for what the software will do for you.

Even if you do use FanTestic to control the test, it is recommended to manually check that the range you have installed

on the fan is the optimum one before starting the Automatic test in FanTestic (section 4.13.3).

Ensure FanTestic is set up to test as recommended by Retrotec. Go to the Settings menu, and click “Advanced – view or

change default parameters” . In the window that opens, click on “Settings” tab.

Start by clicking on “Reset to Standard Defaults” to be sure your FanTestic has the recommended values. To close this

window, use the OK button at the bottom, not the x button in order to be sure your chosen parameters are saved. Only

adjust if you have good reason.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 86 87

Keine Kommentare

Retrotec Blower Door Bedienungsanleitung Seite 44